If the car encounters a flameout, do not start the engine again. Even if it starts, it is difficult or impossible to start, but it will cause damage to the engine, and even seriously cause the engine to be scrapped! So what should we do?
The vehicle waded into water during the driving process. If the inflow of water is extinguished, it is necessary to remain calm and immediately turn off the ignition switch, then remove the battery cathode line as soon as possible to avoid short-circuiting the various electrical appliances on the vehicle due to the inflow of water, and then move the vehicle to a safe place to make the vehicle as high and low as possible, so that the water entering the exhaust pipe can flow out, avoiding damage to the ternary catalytic converter and muffler.
How do I avoid wading in my vehicle? Before wading, we must do a few things,
The first is to be slow, "walk sand, walk water slowly". Whether it is manual or automatic, the wading process must be cut to a low gear. The purpose of this is not only to control the speed of the vehicle, but also to take advantage of the large torque of the engine, smoothly cross the obstacles that may be encountered, and pass the wading section.
The second is not to wade blindly, do not see the vehicle in front of you driving past, think that your vehicle is definitely OK, try to stop and observe the water situation, confirm the water depth and flow rate, and then judge whether to pass.
